Welder Resume Bullet Points
17 examples, each shown weak and strong
A strong welder bullet names the code, the process and the work, then proves it with inspection results a QC manager can check. Pass rates on UT or X-ray, repair rates, output a shift and the qualifications you keep current tell a foreman what work can go to you.
How to use these
- Every [X%], [N] and [$X] is a blank for your own figure. Fill it from your records, or a careful estimate you could explain in an interview. If you have no number, describe the result in words.
- Only use a bullet for work you actually did. Change the details until it describes your job, not this page.
- The ticks are three plain checks done in code: it opens with an action verb, it has a number, and it says what changed. Strong bullets pass all three; weak ones miss at least one.
Weld quality and inspection
Inspectors and QC managers read for pass rates on visual, UT or X-ray inspection and how often your welds need repair.
Weak
Produced high-quality welds.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Passed UT on [X%] of complete joint penetration welds over [N] months, cutting the repair queue for my bay from [N] joints a week to [N].
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Responsible for weld quality on all projects.
- ✗ Action verb
- ✗ Number
- ✗ Result
Strong
Lowered my weld repair rate from [X%] to [X%] by checking fit-up gaps and preheat before every root pass on thick plate.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Familiar with visual inspection of welds.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Inspected my own welds against AWS D1.1 visual criteria before turnover, reducing rejects at final QC inspection by [X%] over [N] months.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Fixed welding defects as needed.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Traced recurring porosity on outdoor field welds to wind stripping the shielding gas and switched to self-shielded flux core, eliminating [N] X-ray rejects a month.
- ✓ Action verb
- ✓ Number
- ✓ Result
Output and fabrication
A foreman wants to know what you build and how much of it: assemblies, parts or feet of weld a shift, from prints, to tolerance.
Weak
Welded steel beams and columns.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Welded [N] beam and column assemblies a week from shop drawings with FCAW, exceeding the bay's weekly target by [X%] for [N] straight months.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Read blueprints and fabricated parts.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Laid out and fit up [N] connection plates a day from prints and weld symbols, cutting fit-up errors caught by QC by [X%].
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Cut and prepared metal for welding.
- ✓ Action verb
- ✗ Number
- ✓ Result
Strong
Cut and beveled plate with plasma and oxy-fuel to print tolerances, reducing scrap from miscut parts by [$X] a month.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Worked on a production line welding parts.
- ✗ Action verb
- ✗ Number
- ✗ Result
Strong
Ran a robotic GMAW cell and hand-welded rework on [N] parts a shift, raising first-pass yield on a trailer frame line from [X%] to [X%].
- ✓ Action verb
- ✓ Number
- ✓ Result
Codes and qualifications
Name the code, process, position and plate or pipe for every test, and show you kept each one current.
Weak
Certified welder.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Qualified to AWS D1.1 in FCAW and SMAW, 3G and 4G plate, and kept continuity logged for [N] years, avoiding a retest when the shop changed QC programs.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Passed welding tests.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Earned an ASME Section IX 6G pipe qualification in GTAW and SMAW after [N] weeks of practice, moving from structural work to a [X%] higher pay rate.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Did pipe welding on job sites.
- ✗ Action verb
- ✗ Number
- ✗ Result
Strong
Welded [N] carbon steel pipe joints a shift in the 6G position with a GTAW root and SMAW cap, achieving a [X%] first-time X-ray pass rate.
- ✓ Action verb
- ✓ Number
- ✓ Result
Safety
Hot work, fumes, cranes and confined spaces are where welders get hurt, so a foreman reads for training with the year and a clean record.
Weak
Followed safety rules in the weld shop.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Completed OSHA 10 and confined space training and ran fire watch for my bay, with the crew closing [N] months without a recordable injury.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Kept work area clean and safe.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Set up fume extraction and grinding wheel checks at [N] weld stations, reducing near-miss reports in the bay by [X%] in a year.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Wore proper PPE at all times.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Led a hot work permit walk-through before every field shift, preventing any fire incidents across [N] tie-in jobs at an operating plant.
- ✓ Action verb
- ✓ Number
- ✓ Result
Training and lead work
Helpers trained, crews run and records kept are what move a welder to lead, foreman or toward inspection.
Weak
Trained new welders.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Trained [N] helpers on FCAW and fit-up, and [X%] passed the shop's D1.1 3G test on the first try, shortening time to welding solo from [N] months to [N].
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Helped the foreman run the crew.
- ✗ Action verb
- ✗ Number
- ✗ Result
Strong
Led a [N]-person field crew erecting and welding steel on [N] commercial jobs, closing punch lists [N] days ahead of the erector's schedule.
- ✓ Action verb
- ✓ Number
- ✓ Result
Weak
Kept track of welding records.
- ✓ Action verb
- ✗ Number
- ✗ Result
Strong
Kept weld maps and welder ID stamps current on [N] jobs, so the QC inspector closed out documentation [X%] faster at turnover.
- ✓ Action verb
- ✓ Number
- ✓ Result
Action verbs for welder resumes
- Welded
- Fabricated
- Fitted
- Tacked
- Beveled
- Inspected
- Repaired
- Qualified
- Erected
- Trained
- Led
- Reduced
More in the full list of resume action verbs.
Next steps
Rewrite your own bullet →
The Bullet Surgeon gives one of your lines three rewrites, free.
A complete welder resume →
A graded example, with notes on why each line works.
What welder reviewers check first →
Common mistakes and specific fixes for this role.
Would they interview you? →
Paste a welder posting and five readers vote on your resume.